Electrical Operational Check; Wiegand Test Unit - Assa Abloy Corbin Russwin Access 600 TCRNE1 Series Installation Instructions Manual

Access 600 M802
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
8 Operational Check, continued

Electrical Operational Check

b
NOTE: Once electrical wiring has been successfully
completed according to proper application, follow
the following steps:
1. Turn power ON.
2. Verify LED located on reader is ON (Red or Green
depending on reader configuration (See reader
LED Configuration).
3. Present proximity credential and verify LED and
sounder activity.
4. Verify valid card read at EAC panel.
5. Verify system operation functions; i.e. , present
Prox credential to reader and unlock door.

Wiegand Test Unit

c
The ASSA ABLOY Wiegand Test Unit verifies your
installation in the field. The test unit checks for
proper wiring, card reader data integrity, lock
functionality including lock/unlock, door position
status, and request-to-exit (REX) status.
In addition, this tool provides product demon-
stration abilities to highlight the product's featu-
res and capabilities.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Feature WT1
12 or 24VDC solenoid
X
lock voltage adjustable
Operates as Fail Safe or
X
Fail Secure
"Learn" mode allows
testing of specific cards
X
without programming at
the panel level
Card reader data integrity
X
is validated at test unit
Works with SE LP10 X
Displays detailed
Wiegand data, including
hexadecimal string and
total bits received
Displays measured end-
of-line resistor values (if
applicable)
19
WT2
X
X
X
X
X
X
X
FM452 07/20