Outside Escutcheon And Mounting Plate Installation - Assa Abloy Corbin Russwin Access 600 TCRNE1 Series Installation Instructions Manual

Access 600 M802
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
7 Installation Instructions, continued

Outside Escutcheon and Mounting Plate Installation

f
NOTE: Feed mortise connectors through the
corresponding hole on the mounting
plate.
1. Attach the mounting plate using (2)
#8-32 x 3/8" Phillips flat head
undercut combo screws in the upper
left and middle right
positions of the mounting plate and
(2) #8-32 x 3/8" Phillips flat head
screws in the bottom positions.
2. Feed the reader cable located on
the back of the outside escutcheon
through the door prep. Remember,
the outside gasket must be used when
installing in an outdoor application
(Figure 1).
3. Secure the mounting plate to the
outside escutcheon with (2) #8-32 x 2"
flat head machine screws (Figure 2).
Outside of Door
Gasket required
for exterior door
applications
Reader Cable
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 1
Inside of Door
Inside of Door
Figure 2
13
FM452 07/20