Table of Contents
Advertisement
Access 600 M802
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
1
Warning, continued
*Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of
the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such
impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening,
or specifying and installing a new fire-rated opening, please consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
2
General Description
The Corbin Russwin Access 600 TCRNE1 Series multi-point lock is designed to interface with existing
Wiegand Electronic Access Control (EAC) panels. The reader requires 12VDC for power and is available
with 125 kHz HID
Grade 1 hardware.
The multi-point lock comes with complete door monitoring which is all integrated inside the lockbody
(RX – Request to Exit & DPS – Door Position Switch) and is available in 12VDC or 24VDC.
Weather seal gaskets are also included for outdoor applications. The Access 600 reader provides visual
(LED) and audible indication of lock state (locked/unlocked).
3
Features
• Latch: Stainless steel, 3⁄4" projection, one-piece
• Deadbolt: One-piece hardened stainless steel
• Guardbolt: Stainless steel, non-handed
• Handed: Easily field reversible without opening case
• Case: 12 gauge heavy duty wrought steel
• Outside lever controlled by 13.56MHz HID iCLASS
credential
• Field-selectable to Fail Safe or Fail Secure
• Door position switch within lock body
• Inside lever provides RX signal and retracts latch
and deadbolt
• Lock to be configured* as Fail Safe or Fail Secure per
AHJ compliance as part of initial lock configuration
• Locks furnished for 1-3/4" doors.
Other door thicknesses require confirmation
with factory.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
•
Minimize build-up of static by touching and/or maintaining contact with unpainted
metal surfaces such as door hinges, latches, and mounting plates especially when
mounting electronic components such as readers and controllers onto the door.
•
Leave components (reader and controller) protected in their respective anti-static
bags until ready for installation.
•
Do not touch pins, leads or solder connections on the circuit boards.
®
proximity technology. Access 600 technology is designed around Corbin Russwin's
4
FM452 07/20
Advertisement
Table of Contents
Need help?
Do you have a question about the Corbin Russwin Access 600 TCRNE1 Series and is the answer not in the manual?
Questions and answers