Table of Contents
Advertisement
Access 600 M802
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
7
Installation Instructions, continued
Install Inside Gasket (if necessary)
g
Remember to install inside gasket when
lock is being used in an outdoor application
a. Gasket fits snug around plate at top and sides,
leaving room for the hole at the bottom.
b. Remove (peel) backing and place gasket
on door.
Connect Earth Ground
h
Connect pin 5 green/yellow ground wire ring terminal to top right screw.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Inside of Door
Required for exterior
door applications.
(2) #8-32 x 2"
Phillips Flat Head
Machine Screw
14
FM452 07/20
Advertisement
Table of Contents
