Table of Contents
Advertisement
Access 600 M802
FE6600/BL6600/MP6600 Series Multi-point Lock
Installation Instructions
7
Installation Instructions, continued
Install Inside Escutcheon Assembly
l
1. Tighten the inside escutcheon securely to
the mounting plate with the Phillips flat head
machine screws provided. Use the #8-32 x 5/8"
for the top of the escutcheon, and the #8-32 x
1/4" screws for the bottom of the escutcheon
located under the turn lever.
NOTE: The inside gasket must be used when installing
in an outdoor application.
2. Check that the turn assembly is functional, and
the deadbolt functions properly.
Install Inside Rose and Inside Lever Assembly
m
1. Rotate the inside rose counter-
clockwise to seat the threads,
then rotate clockwise to
securely tighten.
2. Slide lever handle onto spindle
until fully seated. The handle
must be horizontal and facing
the hinge side of the door.
3. Push lever onto spindle so
minimum gap is visible.
4. Tighten the set screw securely
with a 1/8" hex wrench.
5. Before closing the door, test
that the lever is functional and
the operation of the latchbolt
and deadbolt is smooth.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Inside of Door
Required for exterior
door applications.
8-32 X 5/8" Phillips
Flat Head Undercut
Machine Screw
8-32 X 1/4" Phillips
Flat Head Undercut
Machine Screw
Spindle
Rose
Inside
Lever
17
Set
Screw
FM452 07/20
Advertisement
Table of Contents
