Graphical Symbols And Product Safety Labels - FP PostBase Mini Operator's Manual

Graphical symbols and product safety labels

The following graphical symbols and product safety labels may be used on the
PostBase Mini franking machine, depending on the respective version. You will find
the product safety labels on the serial number plate of the product.
The following overview lists and explains them.
GS mark. "Geprüfte Sicherheit" (Tested safety) according to the
requirements of the German Product Safety Act (ProdSG).
Tested by the accredited laboratory Nemko.
CE label.
With this label, the manufacturer declares that the product meets the
requirements of all relevant EU directives that require such labelling.
The corresponding EC Declaration Of Conformity of the manufacturer is
printed on page 89.
Nemko certification mark.
The approval mark indicates that the product complies with the applicable
standards as required in the USA and Canada.
Nemko-CCL is a NRTL (nationally registered testing lab), which is entitled
to perform this test. Product tested in accordance with IEC 60950-1.
The crossed garbage can is a mark for electrical and electronic
equipment (WEEE directive) and means the following:
The product and accessories (e.g. cables and ink cartridges) may not be
disposed of with household waste.
The bar below the garbage can indicates that the product was marketed
after 13 August 2005.
For proper disposal and recycling of the PostBase Mini franking machine,
please contact the Customer Support.
Symbol for protection class III.
Only use power supply unit specified in the Operator Manual
(see page 87).
Appendix – Graphical symbols and product safety labels
93