Franking; Changing The User (Optional) - FP PostBase Mini Operator's Manual

40
PostBase Mini
6

Franking

In this chapter, you can read how to frank your mail pieces with the PostBase Mini.
You will learn how to set the account to register the postage used and how to insert
letters correctly. Also, the counter function available for franking is described.
Please refer to chapter 5 on page 33 for detailed information on how to set franking
imprint parameters.
6.1

Changing the user (optional)

A user-specific access control for the PostBase Mini can be set up via the optional
PC control software from Francotyp-Postalia (e.g. NavigatorBasic, RemoteOne).
In this case, you are prompted to select a user and enter the corresponding PIN dur-
ing startup. PostBase Mini loads the corresponding user profile. Among other things,
the following settings are stored in the user profile:
– name
– PIN
– budgets
– allocated account(s) and the standard account
– allow / block postage download.
On how to set up and manage users, please refer to the manual of the PC software.
Changing the user
• Briefly press the button on the operating
Press briefly
panel.
You see the list of users.
• In the list, press the button of the desired
user.
• Enter the PIN.
PostBase Mini loads the user profile and then
shows the Home screen.