View Contact Information; Access Control / Pin - FP PostBase Mini Operator's Manual

11.10

View contact information

Important contact information (Phone / Internet) is stored in your franking machine at
the factory. You can view the contact information.
11.11

Access control / PIN

The PostBase Mini can be protected against unauthorised use via a PIN.
With the optional PC control software, you can set up a user-specific access control
for the PostBase Mini. Please refer to the manual of the PC software.
The menu function 'Manage PIN' is then only accessible with the administrator PIN.
Advanced settings & system information
• Open the M .
ENU
• Select C
ONTACT
PostBase Mini displays the stored phone
numbers and URLs.
Enable access control
• Open the M .
ENU
• Select M P
ANAGE
• Press the button to switch on the
access control.
• Type the desired PIN and
continue with
• For checking purposes, enter the PIN a
second time and confirm with
The PIN is stored. The access control is ena-
bled.
If the entered PIN and the second PIN entry
do not match, PostBase Mini will ask you to
re-enter the PIN. Repeat the PIN entry and
the second entry.
I .
NFORMATION
.
IN
.
.
61