Positioning And Franking A Letter - FP PostBase Mini Operator's Manual

42
PostBase Mini
6.3

Positioning and franking a letter

You can use the PostBase Mini to frank postcards and letters up to a thickness of
6 mm (0.23"). For thicker mail pieces, frank the empty envelope or use the special
franking labels of at least 140 mm (5.5") length. You can order suitable labels for the
PostBase Mini from Francotyp-Postalia.
PostBase Mini is ready for franking
You can feed mail pieces to frank when the
Home screen displays the desired settings
for franking.
• Insert the letter:
– side to be printed face up
– top edge first.
• Place the letter at the right hand edge of
the letter slot and push in as far as it goes.
As soon as the sensor (in the back right hand
corner of the letter slot) detects the letter, the
PostBase Mini grips the letter tightly and
prints (franks) it.
During franking, a message informs you
about the printing process.
Do not remove the letter until the Home
screen reappears and the PostBase Mini
releases the letter.