User Interface Language; Standby Time - FP PostBase Mini Operator's Manual

11.4

User interface language

The PostBase Mini user interface supports multiple languages.
11.5

Standby time

The PostBase Mini franking machine will go to standby automatically if it is not used
for some time. The standby time is the time between your last operation and the time
PostBase Mini automatically goes to standby.
Advanced settings & system information
• Open the M .
ENU
• Select L
ANGUAGE
PostBase Mini opens the language adjust-
ment menu. The current setting is shown on
a green background.
• Select the desired setting.
The user interface language changes
immediately.
• Save the setting shown with
The set language will be kept until you
change it again.
• Open the M .
ENU
• Select S
TANDBY
PostBase Mini opens the standby adjust-
ment menu.
• Type the desired time.
• Save the specified standby time with
.
.
T .
IME
55
.