Table of Contents
Advertisement
Lithium Battery Program
ENTER to get the value flash, then click
BATT PRESET:
3/6
INC/DEC to set Capacity protection values
Cap:
Off
or off. ENTER to confirm.
INC
ENTER to get the value flash, then click
BATT PRESET:
4/6
INC/DEC to set the charge current.
CHG I:
4.0A
ENTER to confirm.
INC
BATT PRESET:
5/6
Set the discharge current.
DISC I:
0.4A
INC
BATT PRESET:
6/6
Set the protection cut time or off.
Cut Time:
Off
ESC
After setting, click ESC to step out of the
MODE:
1/6
current interface, and select the desired
Balance Charge
charge/ discharge mode.
Press ESC/STOP to
terminate the current
process when anything
unexpected occurs.
If you would like to modify the setting, go back to Batt Preset and
refresh the setting manually.
· 14
(LiPo/LiFe/Lilon/LiHV)
Press and hold
START/ENTER for
seconds to start the
program.
B6 Evo
Battery No.: 9/10
Click INC/DEC to select one empty program.
None
START/ENTER
MODE:
1/1
Batt Preset
START/ENTER
BATT PRESET:
1/1
ENTER to get the value flash.
Type:
None
Click INC/DEC to select NiMH or NiCd
BATT PRESET:
1/9
Battery Type.
Type:
NiMH
INC
ENTER to get the value flash.
BATT PRESET:
2/9
Click INC/DEC to set the Charge Current.
CHG I:
2.0A
ENTER to confirm.
INC
BATT PRESET:
3/9
Set the Discharge Current.
DISC I:
0.1A
INC
BATT PRESET:
4/9
Set the Discharge Voltage.
DISC V:
0.8V
INC
Set the Delta Voltage, which ranges from
BATT PRESET:
5/9
-dV:
-5mV
-15mV to -3mV.
INC
BATT PRESET:
6/9
Set the Protection Cut-off Temperature.
Cut Temp:
Off
INC
BATT PRESET:
7/9
Set the Re-peak Cycles.
Re-Peak:
1
B6 Evo
NiMH/NiCd Battery Program
15 ·
Hide quick links:
Advertisement
Table of Contents
