Table of Contents
Advertisement
User Calibration
Warning: It is highly recommended NOT to do calibration unless
necessary. SKYRC will not be liable for the consequences
caused by calibration.
To maximize their battery performance in competition, RC gurus may
like to calibrate the battery voltage according to their experience or
multimeter.
Please follow the below steps for safe and smooth calibration with
one 6S LiPo battery.
i. Press and hold ESC and DEC button at the same time, then
connect to power source to power up.
ii. The screen will light up and notify you to connect a 6S battery.
The higher the cell voltage, the better the calibration. One almost fully
charged 6S LiPo battery is highly preferred.
iii. After connecting the battery, calibrate the cell voltage cell by cell.
If you would prefer factory calibration, you are free to reset and
have the original calibration in this interface.
· 22
B6 Evo enables the user to check the overall battery voltage and
each cell's voltage.
Please connect the battery to the charger with both the main socket
and balance lead connected.
Reference connection as below:
This diagram shows
the correct way to
connect your battery
to check the voltage.
After connection, press and hold DEC/INC button simultaneously for
seconds, then release.
The screen will display the total battery voltage and single cell voltage
in rotation automatically.
Any button clicking will take you to exit current battery voltage interface.
B6 Evo
B6 Evo
Battery Voltage Meter
4.20 4.19 4.19V
4.18 4.18 4.19V
Lithium Battery Pack
23 ·
Hide quick links:
Advertisement
Table of Contents
