Pb Lead-Acid Battery Program - Skyrc iMAX B6 Evo Instruction Manual

NiMH/NiCd Battery Program
INC
Set the Discharge/Charge or Charge/Discharge
BATT PRESET: 8/9
D&C cycle: 1 Cycles.
INC
BATT PRESET: 9/9
Set the Trickle Current or off.
Trickle: Off
ESC
After setting, click ESC to step out of the
MODE: 1/5
current interface, and select the desired
Charge
charge/ discharge mode.
Press and hold START/ENTER for seconds to start the program.
Press ESC/STOP to terminate the current process when anything
unexpected occurs.
If you would like to modify the setting, go back to Batt Preset and
refresh the setting manually.
· 16
Battery No.:
None
START/ENTER
MODE: 1/1
Batt Preset
START/ENTER
BATT PRESET:
Type: None
BATT PRESET:
Type:
INC
BATT PRESET:
Cells: 12.0V/6S
INC
BATT PRESET:
CHG I:
INC
BATT PRESET:
DISC I:
INC
BATT PRESET:
Cold:
ESC
MODE:
Charge
Press and hold START/ENTER for seconds to start the program.
Press ESC/STOP to terminate the current process when anything
unexpected occurs.
If you would like to modify the setting, go back to Batt Preset
and refresh the setting manually.
B6 Evo B6 Evo

Pb Lead-acid Battery Program

9/10
Click INC/DEC to select one empty program.
1/1
ENTER to get the value flash.
Click INC/DEC to select Pb or Pb AGM Battery
1/5
Type.
Pb
ENTER to get the value flash, then click INC/DEC
2/5
to select 3 cells or 6 cells. ENTER to confirm.
ENTER to get the value flash, then click INC/DEC
3/5
to set the charge current. ENTER to confirm.
2.9A
4/5
Set the discharge current.
0.2A
5/5
Turn the Cold Charge on or off.
Off
After setting, click ESC to step out of the
1/3 current interface, and select the desired
charge/ discharge mode.
17 ·