Introduction - PLC Electronic Solutions Veracity Control Wheels Wireless Operation Manual

Introduction

The Veracity Control Wheels System consists of:
- PAN and TILT Wheel modules, mounted together on default baseplate.
- Power cable and module interconnect cable(s).
- Selected choice of radio module (dependent on gimbal used with)
- Road case with foam insert.
- Optionally additional third axis ROLL Wheel, if ordered.
This manual describes necessary setup requirements and how to operate the Veracity Control Wheels.
The Veracity Control Wheels system is a professional digitally controlled hand wheel system for operation of RC style
camera gimbal mounts.
Copyright © 2017
Page 4
PLC Electronic Solutions Ltd.
www.plcelectronicsolutions.com