Pairing The Maxima And Veracity Control Wheels - PLC Electronic Solutions Veracity Control Wheels Wireless Operation Manual

Pairing the Maxima and Veracity Control Wheels

1. See "Switching between MōVI (Standard Gimbal), Ronin and Maxima Modes" to ensure the wheels are in
Maxima Mode.
2. To bind the Maxima gimbal to the Veracity Wheels, power on the Maxima and Press the OK button to get to the
Main Menu.
3. Scroll down to 'Remote Pairing' and press the OK button. ***Once in this mode you have 10 seconds to
complete the next step.
4. After 5 seconds, you will hear a "beep" from the Maxima. Power-on the Veracity Wheels with the Zero Button
(located on the back of the PAN Wheel) held down and release after hearing a second beep. The Jeti Radio
Module will automatically bind to the Maxima gimbal.
5. See the section on "Slice (Wireless) Zeroing/Drift Correction" to rectify any drifting issues.
Copyright © 2017
Page 24
PLC Electronic Solutions Ltd.
www.plcelectronicsolutions.com