***Note: These setting values are chosen to mitigate drift, optimizing speed and responsiveness when
used with the PLC Veracity Wheels Software application. As a general rule of thumb, if you increase
axis Speed values, Joystick Deadband will have to be increased to prevent drift. In order to mitigate the
effects of Deadband, complete the Advanced Setup with Deadband Compensation procedure using the
PLC Veracity Wheels Software.
8. From the Profile > Profile Menu, click Write to Device.
9. From the Device > Device Menu, click Write to Device.
10. Ensure the Jeti Radio Module is installed onto the slice.
PLC Electronic Solutions Ltd.
www.plcelectronicsolutions.com
Copyright © 2017
Page 23
Need help?
Do you have a question about the Veracity Control Wheels and is the answer not in the manual?