Mōvi M10/M15/Standard Gimbal (Spektrum Radio) Setup - PLC Electronic Solutions Veracity Control Wheels Wireless Operation Manual

Hide thumbs Also See for Veracity Control Wheels:
Table of Contents

Advertisement

MōVI M10/M15/Standard Gimbal (Spektrum Radio) Setup
1. Ensure the Spektrum DM8 or PLC Spektrum Radio Module is installed onto the slice.
2. Power on the MōVI System and ensure no other Spektrum Radio Controllers are powered on.
3. From the Freefly Configurator Program on your computer, place the receiver in the "Bind" state by doing the
following (See your Gimbal User Manual for model-specific instruction):
a. From your operating system, pair your MōVI with your PC via Bluetooth
b. Click CONNECTION -> Select Bluetooth...
c. Select the Receiver radio from the list of Bluetooth devices.
d. Click CONNECTION -> Connect...
e. Click CONFIGURATION... Then click Remote Controller Config.
f.
Ensure "DSM2 1024" is the selected Radio Type ***This is very important*** and set the following
channel assignments:
 Map Remote Mode: 6
 Map Remote Pan: -2 (or -1 with the PLC Spektrum Radio Module)
 Map Remote Pan Rate: 1 (or 3 with the PLC Spektrum Radio Module)
 Map Remote Roll Trim: -4
 Map Remote Tilt: -3 (or -2 with the PLC Spektrum Radio Module)
 Map Remote Tilt Rate: -7
g. Click SYSTEM -> Bind Radio...
h. Turn the MōVI System off and on again to place it in a "Bind" state.
Copyright © 2017
Page 14
PLC Electronic Solutions Ltd.
www.plcelectronicsolutions.com
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Veracity Control Wheels and is the answer not in the manual?

Table of Contents