Monitoring Refill Operation; Maintenance - Nordson Mesa Fulfill Customer Product Manual

Monitoring Refill Operation

Maintenance

E 2013 Nordson Corporation
See Figure 16.
Under normal conditions, the operator need not monitor or intervene in the
operation of the fill system.
However, if the fill system is unable to satisfy the tank sensor in the time limit
set for the Fill Time, the refill alarm LED will illuminate. Refer to
Troubleshooting for a list of possible fault causes and solutions.
2
1
Figure 16 Fill system controls and indicators
1. Enable On/Off
2. Filling activated symbol and blue LED
Inspect the system daily to ensure that hose fittings are secure and that the
unit is free from dirt and debris. Inspect the filter sock weekly to ensure that
it's not clogged; replace as needed.

Fulfill Retrofit for Mesat Melters
3
3. Fault symbol and red LED
4. Clear fault
29
4
Part 1121938_02