Adding The Auxiliary Control Unit - Cisco TelePresence System 1000 Hardware Options & Upgrade Manual

Adding the Auxiliary Control Unit

Adding the Auxiliary Control Unit
To add the auxiliary control unit Cisco TelePresence 3000, you need the following tools and equipment:
•
•
Remove the replace the audio extension unit by performing the following procedure:
Remove the auxiliary control unit from its packaging.
Step 1
Attach the auxiliary control unit to its bracket using the supplied 5 mm screws.
Step 2
Cisco TelePresence System
5-10
Chapter 5
Large Phillips head screwdriver
Masking tape
Upgrading a Cisco TelePresence System 3000 to a Cisco TelePresence System 3200
OL-16441-01