Removing And Replacing The Camera Lenses - Cisco TelePresence System 1000 Hardware Options & Upgrade Manual

Removing and Replacing the Camera Lenses

Removing and Replacing the Camera Lenses
Take care not to scratch or mar the display screen during the replacement procedure.
Caution
Note The directions left and right refer to the assembly as you face it.
Make sure all system power is turned off before beginning this disassembly.
Caution
Step 1 Remove the top camera hood by removing the screws that secure it to the bracket.
Step 2 Remove the lens hood by removing the two screws on the bottom of the hood.
Cisco TelePresence System
5-6
Chapter 5 Upgrading a Cisco TelePresence System 3000 to a Cisco TelePresence System 3200
OL-16441-01