Options For The Cisco Telepresence System 3200; Parts List; Cisco Telepresence Presentation Codec; Adding A Standalone Cisco Telepresence Presentation Codec To A Primary Codec - Cisco TelePresence System 1000 Hardware Options & Upgrade Manual

Options for the Cisco TelePresence System 3200

Revised: July 28, 2008, OL-16441-01

Parts List

Key Part Description
Presentation Codec, 800-28202-xx
1 Secondary (Presentation) codec
2 Double-wide tray for presentation codec
3
Left bracket for presentation codec
4
Right bracket for presentation codec
5 M4x12mm Pan head screws
5 M8 washers

Cisco TelePresence Presentation Codec

The Presentation Codec provides 30 frames per second capabilities to support full-motion video
presentations between Cisco TelePresence endpoints.
Adding a Standalone Cisco TelePresence Presentation Codec to a Primary
Codec
To add the Cisco TelePresence Presentation Codec to your CTS-3000, perform the following procedure:
Get the IP address for the primary codec by completing the following steps:
Step 1
a.
Note
b.
OL-16441-01
On the IP phone, locate Manual at the bottom of the screen and press the Manual soft key.
If you cannot locate the Manual button, proceed to Step
Locate Info at the bottom of the screen and press the Info soft key.
C H A P T E R
Part Number Qty
800-28202-xx 1
700-25301-01 1
700-25306-01 1
700-27374-01 1
48-2426-01 10
49-1165-01 4
4
Notes
b.
Cisco TelePresence System
4-1