Cisco TelePresence System 1000 Hardware Options & Upgrade Manual page 58

Cisco TelePresence Presentation Codec
c.
Open a browser on a computer that is connected to the network.
Step 2
In the URL field, type the IP address for the primary codec and press Enter. The browser launches the
Step 3
Cisco TelePresence System Administrator.
Log in to the system by entering the following information:
Step 4
a.
b.
Note
Click Login.
Step 5
Locate the Phone pane in the upper left-hand corner of the administrator page and select
Step 6
Troubleshooting > System Reset. the Restart Cisco TelePresence System button appears at the top of
the window.
Click the Restart Cisco TelePresence System button to start the reset.
Step 7
Six boxes appear on the display screens.
After the first box changes to a check mark, turn the power switches for the two left PDUs and single
Step 8
right PDU to the Off position.
There might be an additional PDU to power off that is mounted on the rear of the center display structure.
Note
Caution Make sure all system power is turned off before beginning this disassembly.
Figure 4-1 PDU Location
Power
Cisco TelePresence System
4-2
Scroll down to the IP Address listing and copy the address.
In the Admin field, type admin.
In the Password field, type cisco.
If your administrator has changed the user name or password, enter those values.
Chapter 4 Options for the Cisco TelePresence System 3200
OL-16441-01