Cisco TelePresence System 1000 Hardware Options & Upgrade Manual page 68
Hide thumbs
Also See for TelePresence System 1000:
- Hardware installation manual (96 pages) ,
- Manual (20 pages) ,
- Hardware upgrade manual (166 pages)
Table of Contents
Advertisement
Cisco TelePresence Presentation Codec
Step 17
Route the power cables for the presentation codec.
Figure 4-11
Presentation Codec Cable Routing
Power
Power on the CTS-3000 by turning the power switches to the On position for the two left PDUs, single
Step 18
right PDU, and the PDU on the central display if it is present.
Note
Write down the IP address that displays on the bottom right corner of the display screens. This is the
address of the primary codec unit.
In the browser on the computer, type in the IP address of the primary codec unit.
Step 19
Enter the required information at the login screen. The Cisco TelePresence Administrator window
Step 20
appears.
Cisco TelePresence System
4-12
Chapter 4
Options for the Cisco TelePresence System 3200
OL-16441-01
Advertisement
Table of Contents
