Inserting The Collets (Fig. 16); Disposal - Proxxon FD 150/E Manual

Never tighten the swivel nut if no workpiece was inserted.

Inserting the collets (Fig. 16)

1. Use the wrench 1 supplied with the machine to hold the main
spindle 2 at the provided flat surfaces and screw off the chuck
3 from the main spindle.
2. Thoroughly clean the fit for the collet holding fixture 4 in the
main spindle.
3. Utilise the collet 5 and slightly unscrew the swivel nut 6.
4. Insert the appropriate workpiece in the collet and tighten the
swivel nuts 6 with the wrench 7 provided with the collet set.

Disposal:

Do not dispose of the device in the household waste! The device
contains materials that can be recycled. If you have questions
concerning this topic, please contact your municipal disposal
company or other appropriate municipal institutions.
Caution:
EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product conforms to
the following directives and normative documents:
EU EMC Directive
EU Machinery Directive
Date: 18.09.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the signatory.
FD 150/E
24150
2014/30/EU
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 11.2014
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
2006/42/EC
DIN EN 62841-1/07.2016
- 23 -