Figure 24 System Settings: Wan/Lan: Pptp; Table 9 System Settings: Wan/Lan: Pptp - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual
Vantage service gateway
Hide thumbs
Also See for Vantage Service Gateway VSG-1200 V2:
- Specifications (2 pages) ,
- Declaration of conformity (1 page) ,
- Brochure & specs (6 pages)
Table of Contents
Advertisement
VSG-1200 V2 User's Guide
Figure 24 System Settings: WAN/LAN: PPTP
The following table describes the related fields in this screen.
Table 9 System Settings: WAN/LAN: PPTP
FIELD
WAN Port Mode
PPTP
PPTP Local IP Address Enter the IP address assigned to you.
PPTP Local Subnet
Mask
PPTP Local Default
Gateway
Username
Password
PPP MTU Setting
67
DESCRIPTION
Select this option to activate PPTP support. Refer to
for more information.
Enter the subnet mask assigned to you.
Enter the IP address of the gateway device.
Enter the user name exactly as your ISP assigned. If assigned a name in the
form user@domain where domain identifies a service name, then enter both
components exactly as given.
Enter the password associated with the user name above.
Enter the size of a Maximum Transmission Unit (MTU).
Section 6.5.4 on page 66
Chapter 6 LAN and WAN Setup
Advertisement
Table of Contents
Troubleshooting
