Restart; Smt Logout; Factory Defaults; Figure 175 Smt: Restart - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User's Guide
Note: Note that as you type a password, the screen displays an asterisk "*" for each
character you type.

32.10 Restart

Follow the steps below to restart the VSG.
1 In the main menu, type 6 and press [ENTER]. A screen displays prompting you to
confirm.

Figure 175 SMT: Restart

2 Type Y and press [ENTER] to restart the VSG. Otherwise, type N and press [ENTER] to
cancel the action and return to the main menu.

32.11 SMT Logout

To log out of the SMT, enter 7 in the main menu screen. A "
prompt displays. Enter Y to log out.

Figure 176 SMT: System Logout

32.12 Factory Defaults

If you forgot your administrator login user name and password, you have to use the RESET
button to reset the VSG back to the factory defaults. Refer to
Resetting the VSG restores all system configuration back to the factory defaults. However,
you may retain the subscriber account information.
Note: All system settings will be lost once you reset to the default settings.
Press [ESC] to return to the Main Menu screen.
Follow the steps below to reset the VSG back to the factory defaults.
1 In the main menu, type 8 and press [ENTER]. A screen displays prompting you to
confirm.
2 Type Y and press [ENTER] to reset the VSG.
227
Restart System (Y/N)?
Logout System (Y/N)?
Logout System (Y/N)?
Chapter 2 on page 38.
Chapter 32 Using The SMT
"