This chapter describes the port-location mapping feature.
13.1 Port-Location Mapping Overview
With port-location mapping, you can map a port on the VSG or a VLAN-enabled switch to a
room number in a building (such as a hotel). This is done using IEEE802.1q VLAN tags. The
port-location mapping feature is used together with the PMS billing function so charges can be
done automatically.
13.2 Configuring Port-Location Mappings
Note: Make sure you select Built-in Authentication and Scenario A in the
Authentication screen (see
Configuration screen (see
Click System Settings in the navigation panel and the Port-Location Mapping link to
display the screen as shown.
Chapter 13 Port-Location Mapping
C
Port-Location Mapping
Figure 32 on page
Figure 39 on page
VSG-1200 V2 User's Guide
H A P T E R
83) and configure the PMS
92).
1 3
112