Billing Log; Figure 128 System Status: Billing Log; Table 67 System Status: Billing Log - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

VSG-1200 V2 User's Guide
• To directly access the LAN device, enter the WAN IP address of your VSG and the virtual
port number of the LAN device separated by a colon. For example, enter "http://
192.168.1.1:60001" where 192.168.1.1 is the WAN IP address of the VSG. The login
screen of the LAN device management interface should display.

28.8 Billing Log

Click System Status and Billing Log in the navigation panel to display the screen as shown.
Refer to Section 28.8.1 on page 192
computer.

Figure 128 System Status: Billing Log

The following table describes the labels in this screen.

Table 67 System Status: Billing Log

LABEL
Refresh
Export to Txt File Click Export to File to back the billing logs. Refer to
Clear Log
No
Username/
Location
Billing Profile
Log Time
Usage Time
Bill
Charge from
Status
Go .. page
First
Previous
191
for information on backing up the billing logs to a
DESCRIPTION
Click Refresh to update the screen.
instructions.
Click Clear Log to clear all log entries.
This field displays the index number of the entry.
This field displays the user name or the room number (for Dynamic, PMS or Static
accounts only).
This field displays the name of the billing profile an account is using.
This field displays the time the subscriber logged in using the account.
This field displays the time period allocated for an account.
This field displays the amount of money charged for the time unit(s) purchased.
This field displays the type of the account billing (Dynamic, PMS or Static).
This field displays the billing status or account status.
Select a page number from the drop-down list box to display the selected page.
Click First to go to the first page.
Click Previous to return to the previous page.
Section 28.8.1 on page 192
Chapter 28 System Status
for