Chapter 27 Miscellanea; Overview; Tcp/Ip-Rs-232 Converter Setup; Figure 120 Network Example Using Tcp/Ip-Rs232 Convertor - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

This chapter shows you how to configure TCP/IP-to-RS-232 convertor settings on the VSG to
extend the connection to the account statement printer.

27.1 Overview

In cases where you need to install the VSG and the statement print in different locations and
the RS-232 console cable is not long enough for the connection, you can use a TCP/IP-RS-232
convertor to make an extension. The TCP/IP-RS-232 convertor is a hardware device installed
between the VSG and the statement printer on the LAN.
The following figure shows a network example where the VSG connects to the statement
printer via the TCP/IP-RS-232 convertor.

Figure 120 Network Example Using TCP/IP-RS232 Convertor

27.2 TCP/IP-RS-232 Converter Setup

Configure the TCP/IP-RS-232 converter settings in the Miscellanea screen. Click Advanced
Setup and Miscellanea to display the screen as shown.

Chapter 27 Miscellanea

C
(LAN) Ethernet
VSG-1200 V2 User's Guide
H A P T E R
Miscellanea
RS-232
2 7
182