VSG-1200 V2 User's Guide
Figure 149 SSL Certificate
The following table describes the labels in this screen.
Table 70 SSL Certificate
LABEL
Password
Certificate File
Private Key File
Apply
31.3 Activating SSL Security
Follow the steps below to activate the SSL security in the VSG.
1 Click System Settings, Servers in the navigation panel and select the SSL Security
check box in the Web Server field.
Figure 150 System Settings: Server Configuration: Enable SSL Security
2 Click Apply to save the changes and restart the VSG when prompted.
3 Enable SSL security in the Authentication screen. Click System Setting and
Authentication in the navigation panel
4 A screen displays as shown. Select Enable in the SSL Login Security field
207
DESCRIPTION
Enter the secret password you used when applying for the certificate.
Note: This password must be the same as the one you entered at
the CA's site when creating a certificate.
Specify the certificate sent to you by a CA.
Specify the file that holds the private key.
Click Apply to start the file transfer process.
Chapter 31 SSL Certificate