System Utilities - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

Table 78 SMT: System Status (continued)
FIELD
Console Port
Speed
Web Server Port
E-mail Server IP
Address
WAN
Configuration
WAN Type? (D/S/
P/T)
IP Address
Subnet Mask
Gateway
Primary DNS
Server
Secondary DNS
Server
DHCP
Configuration
DHCP Service?
(D/R/S)
Start IP Address
DHCP Pool Size
Lease Time
Agent Server IP
Address
Primary/
Secondary DNS IP
Address
Press any key at the "Press any to return" prompt to go back to the previous screen.

32.9 System Utilities

Use the System Utilities menus to upgrade firmware on the VSG or change the administrator
login password.
Chapter 32 Using The SMT
DESCRIPTION
This field displays the console port speed.
This field displays the port number for the embedded web server.
If the port number is not 80, then you need to append the port number to the WAN
port IP address to access the VSG web configurator. For example, if 8010 is the
web server port number, then you must enter "http://www.192.168.1.1:8010" in the
address bar on the web browser where 192.168.1.1 is the WAN or LAN port IP
address.
This field displays the IP address of the e-mail server to which the VSG forwards
the e-mail when the subscriber's e-mail server(s) is behind a NAT-enabled network
or firewall.
This field displays the WAN IP address assignment method (Static IP Setting or
DHCP Client).
This field displays the WAN IP address of the VSG.
This field displays the subnet mask on the WAN port.
This field displays the IP address of the default gateway.
This field displays the IP address of the primary DNS server.
This field displays the IP address of the secondary DNS server.
This field displays the DHCP mode (Server, Relay or Disable) on the LAN port.
This field is visible when the DHCP Service field is Server.
This field displays the first of the contiguous addresses in the IP address pool.
This field is visible when the DHCP Service field is Server.
This field displays the size of the DHCP client pool.
This field is visible when the DHCP Service field is Server.
This field displays for how many minutes a DHCP client is allowed to use an
assigned IP address.
This field is visible when the DHCP Service field displays Relay.
This field displays the IP address of the DHCP relay agent.
These fields are visible when the DHCP Service field is Server.
These two fields display the IP address(es) of the DNS server(s).
VSG-1200 V2 User's Guide
224