ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual page 79

VSG-1200 V2 User's Guide
Table 16 System Settings: NAT Pool (continued)
LABEL
Start/End IP
No.
Address List
Delete
Apply
79
DESCRIPTION
Specify the beginning and ending IP addresses of the address pool in the fields
provided and click Add to List.
The following shows three NAT pool examples if the VSG is using a WAN public IP
address of 211.21.21.1:
Group 1: 211.21.21.2 ~ 211.21.21.6 (five IP addresses)
Group 2: 211.21.21.20 ~ 211.21.21.29 (ten IP addresses)
Group 3: 211.21.21.60 ~ 211.21.21.69 (ten IP addresses)
Group 4: 211.21.21.75 ~ 211.21.21.76 (two IP addresses)
Note: You can configure up to ten address pools (each pool can
contain up to 50 addresses) on the VSG.
This read-only field displays the index number.
This read-only field displays the address pool.
Click Delete to remove the selected entry(ies).
Click Apply to save the changes.
Chapter 8 NAT Pool