The Web Configurator; Introducing The Web Configurator; Accessing The Web Configurator; Figure 8 Entering Ip Address In Internet Explorer - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

This chapter introduces how to access the web configurator and perform general system
configuration.

3.1 Introducing the Web Configurator

The web configurator is best viewed with Internet Explorer (version 5.5 or above) or Netscape
(version 6. or later).
Note: JavaScript support must be enabled.

3.2 Accessing the Web Configurator

Follow the steps below to access the web configurator.
Note: The VSG allows only one web configurator session at a time.
1 Make sure your VSG is properly connected (refer to the instructions in
38).
2 Launch your web browser and type the WAN or LAN IP address of the VSG as the web
site address. 192.168.1.1 is the default IP address for the WAN port and 10.59.1.1 is the
default IP address for the LAN port.
3 If you are using a different port number (between 8000 and 8099) for the web server, you
must also append the port number to the WAN IP address separated with a colon ":", for
example, http://192.168.1.1:8080.

Figure 8 Entering IP Address in Internet Explorer

4 A login screen displays. Type "admin" (default) as the administrator user name and
"1234" (default) as the password and click Get Started ...
Chapter 3 The Web Configurator

The Web Configurator

VSG-1200 V2 User's Guide
C
H A P T E R
3
Chapter 2 on page
42