VSG-1200 V2 User's Guide
Figure 60 System Setting: Port-Location Mapping
The following table describes the labels in this screen.
Table 29 System Setting: Port-Location Mapping
LABEL
Single Create
Location Identifier
(ID)
Port Identifier (ID)
Description
Status
Add to List
113
DESCRIPTION
Set the related fields to create a port-location mapping one at a time.
Enter an identity (up to 20 characters) for a mapping. This field must match the
VLAN ID of a port.
Enter the an ID number (between 1 and 999999) of a port for this mapping.
This is the location ID number you set in the PMS.
Enter a description (up to 32 characters) for this mapping for identification
purposes.
Select No Charge if you don't want to bill a subscriber accessing the Internet
at this port location.
Select Charge for use to bill a subscriber accessing the Internet at this port
location.
Select Blocked to stop any subscriber from accessing the Internet at this port
location.
Click Add to List to insert a new mapping rule.
Chapter 13 Port-Location Mapping