Industrial Electronic Devices
NEW CONFIGURATION / OPEN CONFIGURATION:
The
"New
Configuration" button creates the folder which contains the entire device's configuration.
A device's configuration can also be imported or exported:
To clone the configurations of a Programmable "M-Bus Master / BACnet Slave -
Converter" in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button
"Open
Configuration".
ADFweb.com S.r.l.
User Manual M-Bus Master / BACnet Slave
Document code: MN67056_ENG
Revision 1.200
Page 14 of 39