Characteristics; Configuration - ADF Web HD67056-B2-20 User Manual

Industrial Electronic Devices

CHARACTERISTICS:

The HD67056 is a M-Bus Master / BACnet Converter.
It allows the following characteristics:
Electrical isolation between Ethernet and M-Bus (for HD67056-B2-xxx serie);
Electrical isolation between RS485 and M-Bus (for HD67056-MSTP-xxx serie);
Mountable on 35mm Rail DIN;
Power Supply 15...21V AC or 18...35V DC;
Temperature range -40°C to 85°C.
At the Converter can be connected up to 250 standard M-Bus devices. This number depends of the code expressed by the xxx number:
HD67056-B2-20 and HD67056-MSTP-20 support up to 20 M-Bus devices;
HD67056-B2-40 and HD67056-MSTP-40 support up to 40 M-Bus devices;
HD67056-B2-80 and HD67056-MSTP-80 support up to 80 M-Bus devices;
HD67056-B2-160 and HD67056-MSTP-160 support up to 160 M-Bus devices;
HD67056-B2-250 and HD67056-MSTP-250 support up to 250 M-Bus devices.
In the case of HD67056-xxx-160 the device must be mounted on 35mm DIN rail which is horizontally mounted on a wall or cabinet
back-plate. To avoid obstructions to the airflow around the unit it is recommended to not cover the paths of air.
In the case of HD67056-xxx-250 the device must be mounted on 35mm DIN rail which is horizontally mounted on a wall or cabinet
back-plate. These units have a fan in the top of the enclosure. To avoid obstructions to the airflow around the unit it is recommended
to not cover the paths of air. Take care to not cover the fan. It is recommended to put the device into a ventilated cabinet.

CONFIGURATION:

You need Compositor SW67056 software on your PC in order to perform the following:
Define the parameter of BACnet line;
Define the parameter of M-Bus line;
Define which M-Bus variables are readable on BACnet ;
Update the device.
ADFweb.com S.r.l.
User Manual M-Bus Master / BACnet Slave
Document code: MN67056_ENG Revision 1.200 Page 7 of 39