Industrial Electronic Devices
LEDS:
The device has got five LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED
1: Device State (green)
2: Not used
3: M-Bus comm.
4: BACnet comm.
5: Ethernet Link (green)
ADFweb.com S.r.l.
Normal Mode
Blinks slowly (~1Hz)
OFF
Blinks quickly when a reply to a M-
Bus request arrives
Changes state when receive a
correct BACnet request
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
User Manual M-Bus Master / BACnet Slave
Document code: MN67056_ENG
Boot Mode
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Revision 1.200
Page 10 of 39