Services Setup; Figure 29 Bandwidth Management Wizard > Services Setup; Table 23 Bandwidth Management Wizard > Services Setup - ZyXEL Communications P-2302HW-P1 Series User Manual

3.4.3 Services Setup

Figure 29 Bandwidth Management Wizard > Services Setup
The following table describes the labels in this screen.
Table 23 Bandwidth Management Wizard > Services Setup
LABEL
Service
< Back
Next >
Exit
Chapter 3 Wizard Setup
DESCRIPTION
Select the service(s) that should have higher priority when bandwidth is allocated.
If you do not select a service or if you do not see it in the list, the service can still
use bandwidth. However, it has the lowest priority.
Note: You must select at least one service in this screen.
Each service you select (except WWW) becomes a LAN sub-class and a WAN
sub-class in Management > Bandwidth MGMT > Class
it only becomes a LAN sub-class.
Click this to go to the previous screen.
Click this to go to the next screen.
Click this to close this screen and return to the main screen.
P-2302HW/HWL-P1 Series User's Guide
Setup. If you select WWW,
73