Table 133 Firmware Features - ZyXEL Communications P-2302HW-P1 Series User Manual

P-2302HW/HWL-P1 Series User's Guide

Table 133 Firmware Features

FEATURE
Device Management
Firmware Upgrade
IEEE 802.11g Wireless LAN The ZyXEL Device can serve as an IEEE 802.11g wireless access point.
Wireless Security
MAC Address Filter
Any IP
Configuration Backup &
Restoration
Network Address
Translation (NAT)
Port Forwarding
DHCP (Dynamic Host
Configuration Protocol)
Dynamic DNS Support
IP Multicast
IP Alias
Time and Date
Logging and Tracing
PPPoE
Universal Plug and Play
(UPnP)
284
DESCRIPTION
Use the web configurator to easily configure the rich range of features
on the ZyXEL Device.
Download new firmware (when available) from the ZyXEL web site and
use the web configurator, an FTP or a TFTP tool to put it on the ZyXEL
Device.
Note: Only upload firmware for your specific model!
Expand your network by allowing IEEE 802.11g and IEEE 802.11b
devices to connect to your network.
The ZyXEL Device supports WEP encryption for basic security as well
as WPA and WPA2 security standards.
You can also use OTIST to easily configure your wireless security on
both your ZyXEL Device and compatible wireless clients.
Allow or deny access to your wired or wireless network based on the
MAC addresses of the computers communicating with your network.
The Any IP feature allows a computer to access the Internet and the
ZyXEL Device without changing the network settings (such as IP
address and subnet mask) of the computer, when the IP addresses of
the computer and the ZyXEL Device are not in the same subnet.
Make a copy of the ZyXEL Device's configuration and put it back on the
ZyXEL Device later if you decide you want to revert back to an earlier
configuration.
Each computer on your network must have its own unique IP
address.Use NAT to convert a single public IP address to multiple
private IP addresses for the computers on your network.
If you have a server (mail or web server for example) on your network,
then use this feature to let people access it from the Internet.
Use this feature to have the ZyXEL Device assign IP addresses, an IP
default gateway and DNS servers to computers on your network.
With Dynamic DNS (Domain Name System) support, you can use a
fixed URL, www.zyxel.com for example, with a dynamic IP address. You
must register for this service with a Dynamic DNS service provider.
IP Multicast is used to send traffic to a specific group of computers. The
ZyXEL Device supports versions 1 and 2 of IGMP (Internet Group
Management Protocol) used to join multicast groups (see RFC 2236).
IP Alias allows you to subdivide a physical network into logical networks
over the same Ethernet interface with the ZyXEL Device itself as the
gateway for each subnet.
Get the current time and date from an external server when you turn on
your ZyXEL Device. You can also set the time manually. These dates
and times are then used in logs.
Use packet tracing and logs for troubleshooting. You can send logs from
the ZyXEL Device to an external UNIX syslog server.
PPPoE mimics a dial-up over Ethernet Internet access connection.
The ZyXEL Device can communicate with other UPnP enabled devices
in a network.
Appendix A Product Specifications