ZyXEL Communications P-2302HW-P1 Series User Manual page 79

Table 26 Status Screen
LABEL
DHCP
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN Information
SSID
Channel
Security Mode This displays the security mode currently being used on the wireless network.
System Status
System Up Time
Current Date/Time This field displays the current date and time in the ZyXEL Device. You can change
System Resource
CPU Usage
Memory
Usage
Interface Status
Interface
Status
Chapter 4 Status Screens
DESCRIPTION
This field displays what DHCP services the ZyXEL Device is using in the WAN.
Choices are:
Client - The ZyXEL Device is a DHCP client in the WAN. Its IP address comes
from a DHCP server on the WAN.
None - The ZyXEL Device is not using any DHCP services in the WAN. It has a
static IP address.
If you are not using Roadrunner on Ethernet, you can change this in Network >
WAN. If you are using Roadrunner on Ethernet, this is controlled by Roadrunner.
This field displays the current IP address of the ZyXEL Device in the LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
None - The ZyXEL Device is not providing any DHCP services to the WAN.
You can change this in Network > LAN > DHCP Setup.
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN. Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
This field displays how long the ZyXEL Device has been running since it last
started up. The ZyXEL Device starts up when you plug it in, when you restart it
(Maintenance > Tools > Restart), or when you reset it (see
45).
this in Maintenance > System > Time Setting.
This field displays what percentage of the ZyXEL Device's processing ability is
currently used. When this percentage is close to 100%, the ZyXEL Device is
running at full load, and the throughput is not going to improve anymore. If you
want some applications to have more throughput, you should turn off other
applications (for example, using bandwidth management; see
205.
This field displays what percentage of the ZyXEL Device's memory is currently
used. Usually, this percentage should not increase much. If memory usage does
get close to 100%, the ZyXEL Device is probably becoming unstable, and you
should restart the device. See
(unplug the power) for a few seconds.
This column displays each interface the ZyXEL Device has.
This field indicates whether or not the ZyXEL Device is using the interface.
Up - The ZyXEL Device is using the interface.
Down - The ZyXEL Device is not using the interface.
P-2302HW/HWL-P1 Series User's Guide
Section 22.2.5 on page 269, or turn off the device
Section 2.3 on page
Chapter 17 on page
79