Figure 76 Voip > Sip > Sip Settings; Table 60 Voip > Sip > Sip Settings - ZyXEL Communications P-2302HW-P1 Series User Manual

Figure 76 VoIP > SIP > SIP Settings
Each field is described in the following table.
Table 60 VoIP > SIP > SIP Settings
LABEL
SIP Account
SIP Settings
Active SIP
Account
Number
SIP Local Port
SIP Server
Address
SIP Server Port
REGISTER Server
Address
REGISTER Server
Port
SIP Service
Domain
Chapter 9 SIP
DESCRIPTION
Select the SIP account you want to see in this screen. If you change this field, the
screen automatically refreshes.
Select this if you want the ZyXEL Device to use this account. Clear it if you do not
want the ZyXEL Device to use this account.
Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
You can use up to 127 printable ASCII characters.
Enter the ZyXEL Device's listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
Enter the SIP server's listening port number, if your VoIP service provider gave you
one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 95 printable ASCII characters.
Enter the SIP register server's listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 127 printable ASCII Extended set characters.
P-2302HW/HWL-P1 Series User's Guide
147