Sip Settings; Figure 23 Voip Setup Wizard > Sip Settings; Table 18 Voip Setup Wizard > Sip Settings - ZyXEL Communications P-2302HW-P1 Series User Manual

3.3.1 SIP Settings

Figure 23 VoIP Setup Wizard > SIP Settings
The following table describes the labels in this screen.
Table 18 VoIP Setup Wizard > SIP Settings
LABEL
SIP1 Settings
SIP2 Settings
SIP Number
SIP Server
Address
SIP Service
Domain
Authentication
User Name
Password
Chapter 3 Wizard Setup
DESCRIPTION
Enter your SIP number. In the full SIP URI (like 1234@VoIP-provider.com), this is
the part before the @ symbol. You can use up to 127 printable ASCII characters.
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
Enter the SIP service domain name. In the full SIP URI (like
provider.com), this is the part after the @ symbol. You can use up to 127 printable
ASCII Extended set characters.
Enter the user name for registering this SIP account, exactly as it was given to you.
You can use up to 95 printable ASCII characters.
Enter the user name for registering this SIP account, exactly as it was given to you.
You can use up to 95 printable ASCII Extended set characters.
P-2302HW/HWL-P1 Series User's Guide
1234@VoIP-
67