P-2302HW/HWL-P1 Series User's Guide
2
ress and hold the RESET button for ten seconds or until all the LEDs except for the
P
WLAN begin to blink. Release the RESET button when the POWER LED begins to
blink. The default settings have been restored.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The password is "1234". You have finished.
If the ZyXEL Device does not restart automatically,
Device's power. Then, follow the directions above again.
2.4 Web Configurator Main Screen
Figure 8 Main Screen
B
As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar
2.4.1 Title Bar
The title bar provides some icons in the upper right corner.
46
sconnect and reconnect the ZyXEL
di
A
C
D
Chapter 2 Introducing the Web Configurator