Polycom Pano Deployment Manual page 42

Use this deployment if you need to maintain physical separation of the networks.
Note the following:
▪ You can use the HDMI interface to connect monitors to the Pano device directly, or daisy chain it
from one Pano to another monitor.
▪ You can use a different monitor input. Switching from one input to another input on the display must
be done manually.
▪ You may need to separate the management traffic to allow this traffic from the corresponding
networks.
▪ Network configurations could be any of the previous options that meet the security requirements for
the particular customer deployment.
Polycom, Inc.
System Deployment
40