Disable The Secondary Network (Wi-Fi) - Polycom Pano Deployment Manual

Setting
Subnet Mask
Default Gateway
DNS Server
DNS Alternate Server
When you connect, you receive a Successfully connected to <your network's SSID name>
message.
Related Links
Configure Pano for Using Wi-Fi as the Connection

Disable the Secondary Network (Wi-Fi)

You can disable the Wi-Fi network.
Procedure
1. Select Network > Secondary Network.
2. For the Choose Network Type: option, select No Secondary Network.
3. Select Save.
Polycom, Inc.
Description
Specifies the subnet mask address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifies the IP gateway for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifics the DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifics the alternate DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
on page 34
Network Settings
19