Polycom Pano Deployment Manual page 27

Figure 3: HDMI USB Adapter with Two Monitors Setup
Begin the HDMI USB Adapter Setup
There are some initial steps you must complete that are specific to connecting your Pano system and
Polycom video system with an HDMI USB adapter.
Procedure
1. Make sure your Pano system is running the latest software.
2. Connect the adapter USB cable to the USB 3.0 port on the Pano system, shown in the following
figure:
3. Complete the rest of the setup.
Related Links
Complete the Two-Monitor Setup (HDMI Splitter or HDMI USB Adapter)
Polycom, Inc.
Integrating with a Polycom Video System
on page 26
25