Radius; Figure 117 Security > Auth Server > Radius; Table 49 Security > Auth Server > Local User Database; Table 50 Security > Auth Server > Radius - ZyXEL Communications NBG410W3G User Manual

The following table describes the labels in this screen.
Table 49 SECURITY > AUTH SERVER > Local User Database
LABEL
Active
User Name
Password
Apply
Reset

10.3 RADIUS

Click SECURITY > AUTH SERVER > RADIUS to open the RADIUS screen. Configure
this screen to use an external RADIUS server to authenticate users.
Figure 117 SECURITY > AUTH SERVER > RADIUS
The following table describes the labels in this screen.
Table 50 SECURITY > AUTH SERVER > RADIUS
LABEL
Authentication Server
Active
Server IP Address
Port Number
NBG410W3G Series User's Guide
DESCRIPTION
Select this check box to enable the user profile.
Enter the user name of the user profile.
Enter a password up to 31 characters long for this user profile.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select the check box to enable user authentication through an external
authentication server.
Clear the check box to enable user authentication using the local user profile
on the ZyXEL Device.
Enter the IP address of the external authentication server in dotted decimal
notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Chapter 10 Authentication Server
193