No Security; Static Wep; Figure 89 Wireless > Wi-Fi > Security: None; Table 33 Wireless > Wi-Fi > Security: None - ZyXEL Communications NBG410W3G User Manual

Chapter 8 Wi-Fi

8.4.1 No Security

If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device within range.
Figure 89 WIRELESS > Wi-Fi > Security: None
The following table describes the wireless LAN security labels in this screen.
Table 33 WIRELESS > Wi-Fi > Security: None
LABEL
Name
Security Mode Select None to allow wireless clients to communicate with the access points without
Apply
Cancel

8.4.2 Static WEP

Static WEP provides a mechanism for encrypting data using encryption keys. Both the AP and
the wireless stations must use the same WEP key to encrypt and decrypt data.
Your ZyXEL Device allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys,
but only one key can be used at any one time.
In order to configure and enable WEP encryption, click WIRELESS > Wi-Fi > Security >
Edit.
156
DESCRIPTION
Type a name (up to 32 printable 7-bit ASCII characters) to identify this security profile.
any data encryption.
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
NBG410W3G Series User's Guide