Time And Date; Figure 195 Maintenance > Password; Table 114 Maintenance > Password - ZyXEL Communications NBG410W3G User Manual

Figure 195 MAINTENANCE > Password
The following table describes the labels in this screen.
Table 114 MAINTENANCE > Password
LABEL
Old Password
New Password
Retype to Confirm
Apply
Reset

20.4 Time and Date

The ZyXEL Device's Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyXEL Device.
To change your ZyXEL Device's time and date, click MAINTENANCE > Time and Date.
The screen appears as shown. Use this screen to configure the ZyXEL Device's time based on
your local time zone.
NBG410W3G Series User's Guide
DESCRIPTION
Type the default password or the existing password you use to access the system
in this field. If you forget the password, you may have to use the hardware RESET
button. This restores the default password of 1234.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type.
Type the new password again for confirmation.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Chapter 20 Maintenance
327