ZyXEL Communications NBG410W3G User Manual page 222

Chapter 11 Certificates
Table 64 SECURITY > CERTIFICATES > Directory Server > Add
LABEL
Access Protocol
Server Address
Server Port
Login Setting
Login
Password
Apply
Cancel
A. At the time of writing, LDAP is the only choice of directory server access protocol.
222
DESCRIPTION
Use the drop-down list box to select the access protocol used by the directory
server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
specifies how clients access directories of certificates and lists of revoked
A
certificates.
Type the IP address (in dotted decimal notation) or the domain name of the
directory server.
This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
The ZyXEL Device may need to authenticate itself in order to assess the directory
server. Type the login name (up to 31 ASCII characters) from the entity
maintaining the directory server (usually a certification authority).
Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to quit configuring this screen and return to the Directory Servers
screen.
NBG410W3G Series User's Guide